Gas Burning Plants Inspection and Tests

In 2011, the Ministry of Industry and Trade published Regulation on Gas Burning Devices (2009/142 / EC). The purpose of this regulation is to ensure that gas-burning appliances and equipment are normally put on the market and put into service in such a way that they do not jeopardize the health and safety of people and the animals living in the house.

The settlement conformity inspection services provided by the testing and testing bodies include commercial cooking appliances, specially designed equipment for industrial purposes and gas burning devices such as boiler rooms and heat centers. This includes the safe and risk-free operation of the devices listed, on the one hand, the control and inspection of these devices and the safety equipment on the device, as well as the controls of their location.

In our country, the gas distribution companies demand conformity inspection of the gas-burning devices’ settlements, especially before the first installation. When conducting settlement conformity inspection and inspection procedures, the testing and testing bodies mainly comply with the following statutory regulations and standards:

  • Energy Market Regulatory Board (EMRA) Internal Installation Regulation
  • Regulation on Fire Protection of Buildings
  • Communiqué on General Technical Specifications of Construction Works, Machinery and Electrical Installation
  • TS 7363 Natural Gas – Building Installation Project and Application Rules

For gas burning devices, the installation must be done according to the rules, adjusted and correct operation should be ensured. In order to ensure the safe use of the settlements and establishment principles of these devices, the type of gas used, the supply pressure of the gas used, the required clean air flow and the combustion air supply of the device must be checked.

The TS 7363 standard covers:

  • Natural gas equipment fed from the natural gas delivery point and installed inside the building
  • Natural gas installation that sends gas to these devices
  • The organization and arrangement of the projects and details for the flue flues and channels for the flue gas produced by combustion, and the use of the natural gas installation after testing and inspection.
  • Rules to be observed for safe natural gas use within the building

Our company carries out the works of conformity examination for facility settlement, within the scope of inspection and testing of gas incineration plants, in accordance with the relevant legal regulations and standards and test methods published by domestic and foreign organizations.

Inspection Services

Demand for surveillance services is increasing both in our country and in the world of international trade. Increasing quality demands and competition among firms keep the global markets alive. Today, it is not only enough to produce quality products and services,

but these products and services should be proved by their quality and impartial and independent third party supervision. Inspection services, quantity, quality, defined in the sales contract before the introduction of traded goods or services. This service is required to have an International Inspection Company Certificate issued by the Ministry of Economy, Directorate General for Product Safety and Inspection, for the purpose of proving to what extent it meets the requirements of packaging, labeling, loading, transportation, delivery time and so on.

Parallel to this, surveillance services vary within itself such as pre-shipment surveillance, quantity surveillance, evacuation surveillance, product verification according to the approved sample, sampling and analysis studies. For example, a commodity or service subject to trade is subjected to inspection and inspection at every stage from the production stage to the delivery to consumers.

In this way, goods or services that do not meet the standards are prevented. In addition, the quality of the products is determined just before the products are put on the market and the condition of the products before shipment and delivery to the buyer has been determined. This also provides legal security for companies.

In general, inspection and testing services include:

  • Machine valuation
  • Load test of lifting apparatus
  • Examination of life ropes and load test
  • Storage systems and shelf analysis
  • Control of amusement park machines
  • Supervision of manufacturing processes
  • Building insulation inspection and thermal capacity investigations
  • Rope tests and valuation
  • Mechanical and physical tests
  • Vibration exposure measurements
  • Clean room testing and measurements

The important point here is that the inspection and test facilities to provide this service are accredited according to the TS EN ISO / IEC 17020 General criteria standard for the operation of various types of inspection bodies and TS EN ISO / IEC 17025 in accordance with the standard of general conditions for the adequacy of test and calibration laboratories.

Otherwise, the surveillance studies and the documents to be prepared will not be valid. The importer and exporter companies apply to the international surveillance companies to ensure that the matters agreed with the products subject to their foreign trade are fulfilled. ,

by making a number of measurements, tests, checks and analyzes, and documenting the situation with the reports they have edited. In this respect, oversight services have a great responsibility. Our firm carries out its surveillance services in accordance with the relevant legal regulations, standards and test methods published by domestic and foreign organizations.

Electrical Safety Inspections

In order for enterprises to ensure the continuity of operation and production, in order to prevent fire risks and to prevent electrical work accidents, electrical systems should be checked regularly and necessary measurements should be made regularly.

This is a legal requirement in accordance with the Health and Safety Regulations in the Use of Work Equipment issued by the Ministry of Labor and Social Security in 2013. In accordance with the principles of the regulation, employees must be protected from the risk of direct or indirect contact with electricity due to all kinds of work equipment used in the enterprise. In the annex to the mentioned regulation, maintenance, repair and periodic controls (Annex 3), electrical installation,

installation and the regular inspections of accumulators, transformers and similar electrical installations should be done by electrical engineers, electrical technicians or high technicians. Regular inspections of other installations outside of electricity must be carried out by mechanical engineers, machinery technicians or high technicians. Electrical installation is carried out to determine the condition of the electrical installation used in the control and measurement work.

Grounding installation measurements are made to determine the earthing status of the transformer and electrical panels, machinery bodies, generators, compressors and similar equipment in the plant. The control and measurement work for the lightning rod installation is carried out to determine the status of the lightning protection system in the enterprise. In addition to these regulations, the control periods, control criteria and related standards to be taken as basis in these studies are included.

In general, the following services are provided by the inspection and test institutions within the scope of electrical safety inspections:

  • Electrical installation controls
  • Clipboard tests
  • Electrical current power quality controls
  • Harmonic energy analysis
  • Grounding measurements
  • Lightning arrester measurements
  • Cathodic protection measurements
  • Lightning protection measurements
  • Unbalanced and overload measurements in phases
  • Leakage current measurements
  • Residual current measurements
  • Short circuit protection measurements
  • Electric motors measurements
  • Electrical-induced fire prevention measurements
  • Transformer measurements
  • Pump measurements
  • Leakage current relay measurements
  • Earth resistance measurement
  • Selective grounding resistance measurement
  • Specific resistance measurement
  • Phase sequence measurement
  • Mains voltage measurement
  • Insulation resistance measurement
  • Voltage harmonic measurement
  • Fan measurements
  • Compressor technical measurements
  • Loop – Loop impedance measurements
  • Insulation resistance measurements
  • Continuity measurements
  • High voltage measurements
  • Safety inspection of machines
  • Generator inspection
  • Inspection of fire fighting systems and hoses
  • Inspection of motor pumps
  • Piping inspection
  • Inspection of ventilation and air conditioning systems
  • İç tesisat kontrolü periyodik muayene

Our company performs electrical safety inspections in accordance with relevant legal regulations, standards and test methods published by domestic and foreign organizations. In this regard, our company has been accredited by the Turkish Accreditation Agency (TÜRKAK) in accordance with TS EN ISO / IEC 17025 standard. In this way, inspection and inspection procedures and reports are accepted as valid in private and official audits.

Chimney Controls

Benefits of Chimney Leak Testing
One of the factors that are prone to danger in the city is the chimneys. For this reason, it is important that the chimneys are carried out in accordance with the rules, in accordance with the technical requirements, in accordance with the law. Chimneys, which are ignored by these factors, cause poisoning and cause big disasters such as fire. In order to prevent the loss of life and property, the chimney compliance report must be taken. In the report, it is stated that the chimney is not a problem for the construction of the chimney. This test is done by the experts and institutions and individuals who have succeeded in the field, and it is a job that requires great care. In most large fires, the chimney leakage test has not been carried out.
In case of chimney inspection, you will experience many benefits at home and at your workplace. Since you will benefit from air controls, keeping chimney sensors in place and adjusting the height of the chimney, your house or workplace will be protected against fire and possible dangers. Where the leakage test can be carried out include:
  • Apartments,
  • Detached houses,
  • Workplaces,
  • Government offices.
Reliable Service After Proper Transactions
In the chimney work you want to build for your home or workplace, the fact that the report was not taken is an indication that life threatening can occur. There are also places where the conformity report is not given, even if you have a chimney examination. If the experts do not respond to this report positively, you must provide legally specified procedures and materials. Otherwise, if you do the chimney process without a legal procedure, the responsibility will belong to you. Chimneys that are made in accordance with the laws do not cause problems and prevent the loss of life and property. Although many articles are included in the law, one of the most important issues is the quality of the materials to be selected. Since poor quality and fine materials will deform very quickly during burning, you should be careful about this, as this will cause a fire. If you are going to use poor quality material, your compliance report will not result in a positive result.
Before and After Sealing Test
It is known that the leakage test is carried out with specially manufactured technical tools. Thanks to the special instruments for measuring the chimney, it is understood that there is no leakage in the chimney. If there is a seal point, the leak location is determined. However, if there is no leakage in the chimney, your report will be positive. This process has become a necessity to prevent loss of life or loss of property. In particular, those who are engaged in construction work or contracting work to do business without taking this test leads to criminal sanctions because it is legally a crime. Before the accredited chimney control, some operations are required. In this way, the result of the test should be remembered positive. First of all, the chimney must be thoroughly cleaned. After careful cleaning, your chimney will not only provide comfortable traction but also help prevent chimney burns. It is observed that most of the houses or the workplaces are burned by the burning of the institutions accumulated in the chimney.
The chimneys of the workplaces working intensively become unstable against heating over time. It is important to make the necessary maintenance before the leakage test. It is a known fact that carbon dioxide gas is more in the workplace. Therefore, you should not risk the life of your employees, you should clean the chimneys regularly, should be maintained, you must test the leak. If the test result is positive, your natural gas will be opened and your home or work place is ready for use. A chimney according to the test results will continue to operate in a safe working system without any problems. In order not to lose material and spiritual, you should check your chimneys regularly, control them with special measuring machines, and if necessary, you should take care to do what is necessary to solve the problem. As you must complete the necessary precautions and preparations for taking the test, you should not neglect the maintenance and control of the chimney after the test. If you take the necessary care, you will not face any legal problems.

Chimney Inspection

Benefits of Chimney Inspection
Many workplaces and houses result in fire due to the fact that the chimneys are not cleaned, the chimneys are sloppy and unconscious, and they are made with poor quality material. As a result of such disasters that suffered great losses, great sadness is experienced. The process of making chimneys by unqualified people, without obeying the poor quality material and the law, raises problems in such a way as to cause losses. Unconsciously, the chimneys, which are made without proper process and technique, will be a problem regardless of what is used as a combustion material. However, the moment you want to do the chimney, chimney inspection process if you do not face such a problem. Because the chimney inspection process is a legal requirement and must be done at home and work places. Failure to do so will result in criminal sanction in the event of a potential danger. This process, which becomes a legal obligation, is not only for you or those who are in that place; It is also important for the safety of those in the vicinity. Chimney examination has many benefits.
Some of these are those:
  • As the height of the chimney is measured, it will provide good traction.
  • It will help the carbon dioxide gas not to spread into your home or workplace.
  • Setting the weather sensors will help to avoid being affected by weather events such as wind.
  • It will not allow fire and loss of life and property.
Provision of Conditions
People who are going to have chimneys at home or work show flexible behaviors at some points to reduce costs. One of these areas is the selection of materials used during the construction of chimneys from poor quality and cheap products. In order to prevent this situation, a chimney inspection process has been made obligatory. However, many people ignore this situation and do not initiate legal proceedings, especially when making chimneys for their homes. Then, a possible problem is also experiencing great losses. You should act consciously, take all precautions. Some conditions must be fulfilled before the flue inspection process is carried out. Some of these are as follows: You must select the products to be used for the chimney construction from the products of the best firms. You should opt for well insulated products and prefer materials that are resistant to high temperatures and weather events. Before starting the inspection, it is recommended that you clean it thoroughly if you have a pre-existing chimney. A chimney that is cleaned at regular intervals will have a long life and it will be useful if you do not experience material and moral losses. You must check the air ducts and purchase heat-resistant building materials. By choosing the products of reliable companies, you can get out of your inspection process smoothly and use your chimney comfortably and safely.
Evaluation of Test Result
Those who examine your chimneys are experts. After the examination process, you are given a report. If the chimney passing through the leak test is reported with a positive result, you can continue to use it safely. However, if the negative result is found in the result of the report, the construction and use of your chimney will be stopped. At this point, it is important to evaluate and understand the test result well. If the materials used for the construction of the chimney are decided to be of poor quality, you should understand that the product you have selected for the chimney construction is made of poor quality material and does not have a TSE certificate. You should start to work at this point as soon as possible, you should use quality and TSE documents for your chimney. If you have a building that works with natural gas, you can use it after a positive test. A report is submitted to the natural gas company and you can start the process for the opening of natural gas. It has become a legal requirement that these procedures be made in order to start using your natural gas. Otherwise, the natural gas company will not consider your application. Because the suitability of the chimney for the use of natural gas is of great importance. In case of a problem in the chimney, in order to prevent possible dangers and to blame the natural gas company, these procedures need to be done. You should do legal actions for yourself, your relatives and your environment, prevent illegal operations and not even threaten them. After these operations, if you clean or make your chimney periodically, you will increase the shooting power and flow of the chimney, and you will be able to serve you for many years.

Chimney Compatibility Control

Benefits of Chimney Compliance Check

Regular inspection of the chimneys in your home or workplace will play an active role in the removal of the gas. Testing the chimneys is a legal requirement. In addition, the chimney compliance tests must be completed in order to use your gas. All these tests are carried out by specialist institutions. Quality materials must be selected for the installation of chimneys. In this way, the material against the resulting temperature will provide durability and long-term use. Special devices are used in the process of carrying out the compliance checks of the chimneys. With the help of these devices, it is checked whether the chimneys leak gas. Conformity checks must be carried out by qualified personnel. It is also audited by specialized institutions with specific powers. Chimney compliance certificate is given after the chimney compliance certificate. After this document you can apply for gas expansion.

Who Makes Chimney Compliance Check

Chimney compliance checks are audited by institutions with certain powers and compliance checks are performed. Chimney checks are legally determined. In addition, the law is considered as a legal obligation. If the use of gas is required, these chimneys must be qualified. Chimney inspection process is a process that requires professionalism. Especially the quality of the chimney materials will lead to a successful inspection.

What are the Benefits of Chimney Compliance Check

It ensures that the chimney, which is used to expel the gas you use, works properly. Thanks to the hammer force of the chimney, the desired efficiency will be increased. In addition, the way to actively use your gas is through conformity check. The chimneys must be prepared within the legal framework. How the chimneys are made and what kind of materials are legally prepared.

The Importance of Tightness Testing

The leakage test is carried out for reliable use of the chimney. In this test conducted by the relevant institution, it is checked whether there is any leakage from any part of the chimney. If there is a gas leak in the chimney, it may cause dangerous consequences. For this, the necessary precautions should be taken and a leak test is required. Products used in the chimney should be made of heat sensitive substances. The leakage test is also included in the legal framework. The purpose of the tightness test is to ensure that the gas is safely released in the flue. It is found by the leak test if the gas makes any leakage on the road while it is going out. For this, accredited flue control must be performed.

The use of natural gas is becoming increasingly widespread nowadays. It is also easy to use and clean. Since the gas is a flammable substance, it is necessary to take necessary measures. Conformity testing is done for your safety. It is also made separately for each gas use. All these tests are carried out professionally by the specialized institutions. If your chimney has completed the required tests, the gas will not be opened. For this purpose, you should definitely take the examples of the chimney related projects and find out how they should be. The legal framework for how the chimney should be identified. Within this framework, the competent authorities can help you to open your gas by performing all the tests. In the choice of institution, the institutions that provide corporate services and who are experts in their fields should be selected. This way, you can use your gas in a more professional way. These reports, which are included within the scope of the natural gas project, should be taken from the correct and reliable sources and submitted to the institution. If the documents given are also inadequate, the institution will ask you to re-evaluate. It should be desirable to prepare the projects reliably and open the gas after the legs have been subjected to the necessary tests. In this way, the use of gas will be more reliable.